Traynor YBA-1 Tribute Head

Looking for great sounding valves for Traynor YBA-1 Tribute Head amplifier? You’ve come to the right place.

Valves for Traynor YBA-1 Tribute Head.

The Traynor YBA-1 Re-Issue Tribute Head amplifier uses:

• 2 x ECC83 (also called 12AX7) preamp valves.
• 1 x Balanced ECC83 for the phase inverter in position V3.
• 2 x EL34 matched power valves/power tubes.

We recommend JJ valves for the Traynor YBA-1 Tribute Head amplifier. They are a significant upgrade in quality and guarantee awesome tone and power at a very competitive price.

We also stock Electro Harmonix, Marshall and Sovtek valves as well if you prefer those brands.

Order your valves for Traynor YBA-1 Tribute Head below and hear the difference they make.

Bring back the power and sparkle to your guitar amplifier. So treat yourself to a brand new set of valves today.

• A significant upgrade in valve quality.
• Each valve kit is carefully chosen, fully tested and the power valves are digitally matched.
• Global delivery – we ship all over the world every single day.

Replace the Valves on your Traynor YBA-1 Tribute Head.

If you have any questions about replacing the valves for Traynor YBA-1 Tribute Head please do not hesitate to drop us an email. We have over 30 years of experience and so will be happy to advise.

Also, take a look at our FAQ section where you will find the answers to most questions on changing your valves.

About the Traynor YBA-1 Tribute Head:

 The Traynor YBA-1 rapidly became the voice of guitar players looking for massive tone and drive from their amp in the 60s and 70s. It has no less than four separate inputs. Note that each is designed with varying input sensitivities allowing for different tones.

Channel One inputs deliver higher gain and drive than the darker and warmer Channel Two inputs. However, each pair of inputs have their own highly responsive volume controls. Inputs can also be stacked. So this allows both inputs to be blended for that massive “vintage” tone.

The Traynor YBA-1 Tribute Head also has an output attenuator located on the back of the head. This is important as it allows the Traynor YBA-1 Tribute Head to be used in the studio, rehearsal hall or smaller stages. It also has five power level settings. Choose from 40, 20, 10, 5 and 2.5 watts. Consequently, the master level can be changed while leaving the tone of the amp unchanged.

Features of the Traynor YBA-1 Tribute Head.

• Separate Level Controls for Channels One and Two.
• Channels Can Be Stacked and Blended for Additional Gain.
• In addition, the Output Power Attenuator means you can choose 40, 20, 10, 5 and 2.5 watts.
• Made in Canada.

So, if you’re looking for great sounding valves for Traynor YBA-1 Tribute Head amplifier you’ve certainly come to the best place.