Rivera Sedona Lite
Looking for great sounding valves for Rivera Sedona Lite amplifier? You’ve come to the right place.
Valves for Rivera Sedona Lite amplifiers
The Rivera Sedona Lite amplifier uses:
- 1 x ECC83 preamp valve (also called a 12AX7),
- 1 x balanced ECC83 for the phase inverter in position V2
- 2 x EL34 matched power valves/power tubes.
We recommend JJ valves for Rivera Sedona Lite amplifier. They offer a great tone at a very competitive price. You can order these singly, the power valves as matched pairs or the full kit. We recommend you change all your valves at the same time to make sure it is performing at its very best.
Bring back the power and sparkle to your guitar amplifier. Treat yourself to a new set of valves.
- Selected Premium Grade valves for superior tone, power and performance across the range.
- Every valve kit is carefully selected, digitally tested, balanced and matched before we ship to you.
- We have over 30 years in the industry so you are in very safe hands.
Replace the valves on your Rivera Sedona Lite amplifier.
If you have any questions about replacing the valves for Rivera Sedona Lite please do not hesitate to get in touch. We have over 30 years of experience and will be happy to advise.
We also recommend that you take a look at our very helpful FAQ section. Here you will find the answer to most questions along with some great tips if you are new to upgrading your tubes.
About the Rivera Sedona Lite amplifier.
First of all, the Rivera Sedona Lite is an EL34 powered Electric and Acoustic amp. The Rivera Sedona lite’s two independent and different preamplifier channels offer a great deal of choice.
Channel 1 features an ultra-low noise input that allows you to accept signals from balanced or unbalanced inputs. While Channel 2 features a harmonically active unbalanced input to amplify either a passive or active instrument, including electric guitars.
Each channel has 3-band equalization and features such as a mid switch and a bright switch. Due to the Rivera Sedona Lite’s tweeter, it can reproduce acoustic instrument’s sparkling harmonics. This can be turned off when using an electric guitar.
For lounge and small-venue performers wanting to keep it simple, the Sedona Lite can act as a small P.A. system as well as an instrument amplifier. Plugging your microphone into Channel 1 and your instrument into Channel 2 allows you to be a solo performer.
The warmth of valves for your voice as well as your instrument. The Rivera Sedona Lite cabinets are made of rugged solid-core plywood. As a result, this is the perfect amp for gigging, studio or home use.
Features
- 12″ Celestion G12T-75 and a high-power dome tweeter.
- Speaker Output Impedance: 8 ohms.
- Valves for Rivera Sedona Lite: 2 x ECC83 and 2 x EL34.
- Output Power: 55 Watts RMS into 8 ohms.
- 12″ Celestion G12T speaker.
- Power dome tweeter
- Accutronics spring reverb.
- Height: 18″.
- Width: 75″.
- Depth: 12″.
- Weight: 49lbs.
So, if you’re looking for great sounding valves for Rivera Sedona Lite amplifier you’ve come to the right place.
Simply choose the complete replacement valve kit or the seperate valves for your amplifier below:
Showing all 5 resultsSorted by price: high to low
Why buy your new valves from Ampvalves?
- Amazing Quality - All our valves have been tested to the highest possible standard using the best testing equipment on the market.
- 100% Guarantee - All of our valves are fully guaranteed for complete peace of mind.
- Soak Testing - All of our valves are soak-tested for 30 minutes to reduce failures after fitting.
- Rated 5 Stars on Trustpilot
- Awesome Tone - You'll hear the difference. A new set of tubes will get your amp sounding and performing like new.
- Stunning Price - Our individual Valves and complete Amp Kits are competitively priced to ensure you get great value.
- Superb Customer Service - We are always at the end of the phone to answer any questions you may have. We are all guitarists here and treat every customer as we would like to be treated.
