Fender 68 Custom Deluxe Reverb Reissue

Looking for great sounding valves for Fender 68 Custom Deluxe Reverb Reissue amplifiers? You’ve come to the right place.

Valves for Fender 68 Custom Deluxe Reverb Reissue amplifier.

The Fender 68 Custom Deluxe Reverb Reissue amplifier uses:

• 4 x ECC83 preamp valves (also called 12AX7).
• 1 x ECC81 preamp valve (12AT7) for the reverb in position V3.
• 1 x Balanced ECC81 for the phase inverter in position V6.
• 1 x GZ34S (5AR4) rectifier valve.
• 2 x 6V6S matched power valves.

Valve layout for preamp valves for the Fender Custom Deluxe Reverb Reissue.

V1: ECC83 – first gain stage for channel 1.
V2: ECC83 – first gain stage for channel 2.
V3: ECC81 – reverb driver.
V4. ECC83 – first gain stage for channel 2 and reverb return.
V5: ECC83 – tremolo.
V6. ECC81 balanced for the phase inverter.

We always recommend JJ valves for this amplifier. This is because they guarantee you will get awesome tone and power – and long life.

Order your valves for Fender 68 Custom Deluxe Reverb Reissue below and hear the difference.

So bring back the power and sparkle to your guitar amplifier. Treat yourself to a brand new set of valves today. 

• Every valve is carefully selected, fully tested, digitally balanced and matched.
• 100% warranty on every valve so order with confidence.
• Fast delivery options with full tracking and insurance.
• Global shipping -m we ship all over the world every single day.

Replace the Valves for Fender 68 Custom Deluxe Reverb Reissue

If you have any questions about replacing the valves for Fender 68 Custom Deluxe Reverb Reissue have a look at our FAQ section. If you still can’t find the answer you are after, please drop us an email and we will be happy to help.

About the Fender 68 Custom Deluxe Reverb Reissue:

This 68 Custom Deluxe Reverb amplifier is a true classic. It draws from the most authentic, original Fender tones. The well-known “Silverface” panel represents an era where Fender amps were a staple, go-to tube amp for performers and studios throughout the rock ‘n’ roll world.

The 68 Custom Deluxe reverb features a 1 x 12″ Celestion speaker. They’ve added reverb and tremolo on both the “Custom” and “Vintage” channels. So the 68 Custom Deluxe delivers big sounds from an amp that is portable enough to take from gig to gig.

Here’s what Fender say about the 1968 Custom Deluxe Reverb Amp:

“For countless guitarists, the Deluxe Reverb has been the go-to amp for that classic Fender sound.

1968 was a transitional year for Fender amps. The tone that was still pure Fender but a look that was brand new. With a silver-and-turquoise front panel and classy aluminium for example. Plus that lovely “drip edge” grille cloth trim.

The Deluxe Reverb received a fresh new face as it remained the ideal recording and performing amp. Small, light and moderately powered, it produced big tube tone.  In addition, it adds world-class Fender reverb and vibrato effects.

Finally, the ’68 Custom Deluxe Reverb’s single 12″ Celestion G12V-70 speaker also delivers a more distinctively rock ‘n’ roll flavour”.

Specifications:

• Inputs: Four – (1/4″, Two Custom and Two Vintage).
• Channels: Two – (Custom and Vintage).
• Speaker: One – 12″ Celestion G12V-70.
• Pre Amp Valves/Tubes: 4 x ECC83 and 2 x ECC81 (one balanced).
• Power Valves/Tubes: 2 x 6V6.
• Rectifier Valve/Tubes: 1 x GZ34S (5AR4).

So, if you’re looking for great sounding valves for Fender 68 Custom Deluxe Reverb Reissue amplifier you’ve come to the right place.