Fender 65 Deluxe Reverb
Looking for great-sounding valves for the Fender 65 Deluxe Reverb amplifier? You’ve come to the right place.
Valves for Fender 65 Deluxe Reverb amplifier.
The Original Fender 65 Deluxe Reverb amplifier uses 9 valves in total. It is made up of:
- 4 x ECC83 preamp valves (also called 12AX7).
- 1 x ECC81 (12AT7) for the reverb driver in position V3.
- 1 x ECC81 specially balanced for the phase splitter position (position V6).
- 1 x 5U4GB rectifier valve.
- 2 x 6V6S matched power valves/power tubes.
Valve layout:
V1: ECC83 – first gain stage for channel 1.
V2: ECC83 – first gain stage for channel 2.
V3: ECC81 – reverb driver.
V4. ECC83 – first gain stage for channel 2 and reverb return.
V5: ECC83 – tremolo.
V6. ECC81 balanced for the phase inverter.
Note: The Fender 65 Deluxe Reverb Reissue (1993 onwards) uses the exact same valve set except for the rectifier valve which was replaced with a GZ34 (5AR4) rectifier valve.
Your valves will start to deteriorate the moment you start using them, just like your guitar strings do. This is not a problem at first but once you get to around 1,000 hours playing time they will need replacing.
We always recommend JJ valves for the Fender 65 Deluxe Reverb amplifier. This is because they guarantee you will get awesome tone and power at a very competitive price.
So bring back the power and tone to your guitar amplifier. Treat yourself to a brand new set of valves and hear the difference.
- Best valve set available for the Fender ’65 Deluxe Reverb amplifier.
- Selected Premium Grade JJ valves for superior tone and power.
- Each valve kit is carefully chosen, fully tested and digitally matched.
- Fast delivery options available with full tracking and insurance.
- We ship internationally every day so you can order with confidence.
Replace the Valves for Fender 65 Deluxe Reverb.
If you have any questions about replacing your valves please do not hesitate to drop us an email.
We recommend that you also have a look at our FAQ Section where may have already answered your question. You will also find lots of useful hints and tips if you are new to upgrading your tubes.
About the Fender 65 Deluxe Reverb amp:
The Fender 65 Deluxe Reverb was designed for rock, country or blues players who want a reasonably powered amp they can crank up on the gig or in the studio. You will hear this amp on many famous songs.
Features include one 12″ 8-ohm Jensen C-12K speaker, dual channels (normal and vibrato), tube-driven Fender reverb, tube vibrato, and two-button footswitch for reverb and vibrato on-off.
Features of the amp:
- Output: 22 watts into 8 ohms.
- Normal Channel: Volume, Treble, Bass.
- Vibrato Channel: Volume, Treble, Bass, Reverb. Vibrato: Speed, Intensity.
- Height: 17.5 inches (44.45 cm), Width: 24.5 inches (62.23 cm), Depth: 9.5 inches (24.13 cm)
- Valves/Tubes used: 4 X ECC83, 1 X ECC81, 1 x balanced ECC81, 1 x GZ34 and 2 X 6V6S matched power valves,
- Finally the all-important weight: 42 lbs. (19.05 kg).
Replace the Valves/Tubes for Fender 65 Deluxe Reverb. Order yours today and hear the difference.
Simply choose the complete replacement valve kit or the seperate valves for your amplifier below:
Showing all 5 resultsSorted by price: high to low
Why buy your new valves from Ampvalves?
- Amazing Quality - All our valves have been tested to the highest possible standard using the best testing equipment on the market.
- 100% Guarantee - All of our valves are fully guaranteed for complete peace of mind.
- Soak Testing - All of our valves are soak-tested for 30 minutes to reduce failures after fitting.
- Rated 5 Stars on Trustpilot
- Awesome Tone - You'll hear the difference. A new set of tubes will get your amp sounding and performing like new.
- Stunning Price - Our individual Valves and complete Amp Kits are competitively priced to ensure you get great value.
- Superb Customer Service - We are always at the end of the phone to answer any questions you may have. We are all guitarists here and treat every customer as we would like to be treated.
