Fender Champ 25
Are you looking for great sounding valves for your Fender amplifier? Great – you’ve come to the right place.
Valves for Fender Champ 25.
The Fender Champ 25 amplifier (and 25 SE) uses:
- 1 x balanced ECC83 (also called a 12AX7) preamp valve.
- 2 x 6L6GC matched power valves/power tubes.
Note: Some Champ 25 amps were supplied with 5881 power valves. Please check what you have in your amp before you place an order. The JJ 6L6GC is significantly longer than the 5881 and will not fit in some amps.
We always recommend JJ valves for Fender Champ 25 amplifier. This is because they give stunning tone and power at a very competitive price. JJ is one of only five manufacturers of valves in the world.
So don’t pay more for rebranded versions of the same valve at higher prices. You can order these singly, as matched pairs, or a complete set of three valves. We always recommend you change all your valves at the same time.
So order your valves below and get your amp sounding better than ever.
Bring back the power and sparkle to your guitar amplifier. Treat yourself to a brand new set of valves today.
- Best valves for Fender Champ 25 amplifiers.
- Every valve kit is individually selected, fully tested, digitally graded, balanced and matched before despatch.
- Fast delivery options available with full tracking and insurance.
- Global delivery – we ship all over the world.
Replace the Valves on your Fender Champ 25.
If you have any questions about replacing your valves please do not hesitate to drop us an email. We have over 30 years experience so we’re sure we can help.
You may also like to take a look at our FAQ section. Here we answer all the most popular questions on upgrading your valves.
About The Fender Champ 25.
The Fender Champ 25 is a hybrid combo amp that uses both tube and solid-state circuitry. It pushes 25 watts through a single 12-inch speaker so it’s a very handy size and easily portable.
The Fender Champ 25 is an interesting little fellow. It uses has two 6L6GC in the power stage and one ECC83 (12AX7) valve as a phase splitter. This valve needs to be balanced as it is being used as a phase inverter not juts as a preamp valve.
The phase splitter, or inverter, distributes the signal between the 2 power valves. The rest of the pre-amplification is done using solid-state components. The power valves feed a lovely 12″ Fender speaker.
The amp has two channels, one clean and one with adjustable gain control.
It also has reverb and independent tone controls for each channel. Channels can be switched with a foot pedal or control switch, and there is an effects loop on the front of the amp, not the back. It’s rated at 25 watts but sounds more like 40 watts.
Years of Production: 1992 – 1994.
Valves for Fender Champ 25.
So there you have it. If you’re looking for great sounding valves for Fender Champ 25 amplifier you’ve certainly come to the right place.
Simply choose the complete replacement valve kit or the seperate valves for your amplifier below:
Showing all 4 resultsSorted by price: high to low
Why buy your new valves from Ampvalves?
- Amazing Quality - All our valves have been tested to the highest possible standard using the best testing equipment on the market.
- 100% Guarantee - All of our valves are fully guaranteed for complete peace of mind.
- Soak Testing - All of our valves are soak-tested for 30 minutes to reduce failures after fitting.
- Rated 5 Stars on Trustpilot
- Awesome Tone - You'll hear the difference. A new set of tubes will get your amp sounding and performing like new.
- Stunning Price - Our individual Valves and complete Amp Kits are competitively priced to ensure you get great value.
- Superb Customer Service - We are always at the end of the phone to answer any questions you may have. We are all guitarists here and treat every customer as we would like to be treated.
