VReplacement Valve Kit for Peavey ValveKing 20 MH amplifier

Peavey ValveKing 20 MH

Looking for great-sounding valves for your Peavey amplifier? You’ve come to the right place.

Valves for Peavey ValveKing 20 MH amplifier.

The Peavey ValveKing 20 MH amplifier uses:

  • 2 x ECC83 (also known as 12AX7) preamp valves.
  • 1 x Balanced ECC83 for the phase splitter (in position V3).
  • 2 x EL84 matched power valves/power tubes.

We always recommend Sovtek or JJ valves for the Peavey ValveKing 20 MH amplifier. They offer a great tone at a very competitive price.

You can order these singly or the power valves as matched pairs. However, we strongly recommend you replace all your valves at the same time to get the best power and tone.

Order your tubes below and hear the difference they make.

Bring back the power and sparkle to your guitar amplifier. Treat yourself to a new set of valves.

  • Best valves for Peavey ValveKing 20MH. Selected Premium Grade valves for best possible performance.
  • Every valve kit is carefully chosen, fully tested, digitally graded, balanced and matched before we despatch to you.
  • Fast delivery options available with full tracking and insurance. So order with complete confidence.
  • We ship all over the world every single day.

Replace the Valves for Peavey ValveKing 20 MH amplifier.

If you have any questions about replacing the tubes/valves for Peavey ValveKing 20 MH please drop us an email and we will get straight back to you.

We have over 30 years of experience and so we are always happy to help with any questions.

We also recommend that you take a look at our very useful FAQ section.

Here we answer all the most popular questions we get asked each month along with loads of useful tips on upgrading your valves.

About the Peavey ValveKing 20 MH amplifier.

The Peavey ValveKing 20 MH is a two-channel amp with 20 watts of all valve output power. It uses 3 x ECC83s and 2 x EL84s to create what the manufacturer describes as a “Rugged, go-to amp that guitarists can’t wait to plug into”.

Now the new generation of ValveKing adds features and versatility that raise the bar”. Designed with the attention to detail and tone you would expect from a boutique amplifier.

The Peavey ValveKing 20 MH is packed with useful features. Especially useful is the USB Direct Recording Output for plugging your amp straight into a DAW on a computer.

Making it even easier to use this amp is the built-in Peavey MSDI. This eliminates the need for miking amps by allowing the signal to be sent directly to the mixing/recording console.


  • Exclusive Microphone Simulated Direct Interface (MSDI) with ground and speaker defeat.
  • TSI tube monitoring with LED pass/fail warning lights.
  • Vari-Class variable Class A simulation control.
  • Microphone Simulated USB Recording Output.
  • Buffered Effects Loop.
  • Weight: 14.59 lbs.
Tubes for sale for Peavey Valveking 20 MH amplifiers.

So, if you’re looking for great sounding valves for your Peavey amplifier – you’ve certainly come to the best place.

Scroll to Top