Marshall JVM 410

Looking for great sounding valves for the Marshall JVM410 amplifier? You’ve come to the right place.

Valves for Marshall JVM410H amplifier.

The Marshall JVM410H (head) and JVM410C (combo) amplifier use:

4 x ECC83 (also known as 12AX7) preamp valves.
1 x Balanced ECC83 for the phase splitter position V5.
4 x EL34 matched power valves/power tubes.

We offer complete valve kits with either Marshall or JJ power valves. You can also buy individual preamp valves or sets of matched power valves.

Order your valves below and hear the difference they make.

Bring back the power and tone to your guitar amplifier. So treat yourself to a new set of valves today.

Every valve kit is carefully chosen, fully tested, digitally balanced and matched.
Fast delivery options available with full tracking and insurance so you can order with complete confidence.
We ship all over the world every day.

Replace the valves on your Marshall JVM410H amplifier.

If you have any questions about replacing your valves please do not hesitate to drop us an email. The best person to answer your question will get straight back to you.

We have over 30 years of experience and will be happy to advise.

About the Marshall JVM410H amp:

British-built, the 100 Watt all-valve JVM410H head redefines versatility thanks to four tonally independent channels: clean, crunch, OD1 and OD2, each with three switchable modes. So each mode reconfigures the gain structure of each channel, making twelve modes in total.

The JVM410H front panel looks mind-boggling with its twenty-eight controls and eight switches. However, it is intuitively laid out, so it’s remarkably simple to use.

It also features four studio-quality digital reverbs (one per channel), individual channel EQ, two master volumes, and a memory that can recall your reverb, FX loop and master settings.

Combining some of the finest Marshall sounds, this Marshall has a vast tonal palette. They take you from ‘Plexi’/JTM45 cleans through JCM800 roar to modern high gain.

A Guitar World Magazine review said: ‘It’s the ultimate rocker’s Marshall and may be the most significant Marshall amp since the JCM800.’

I don’t think you can get a better review than that.

Marshall JVM410H Features:

100-Watt valve head.
Valves/Tubes: 4 x ECC83 (12AX7s), 1 x Balanced ECC83 and 4 x matched EL34 power tubes.
This is a fixed bias amplifier.
Independent, foot-switchable channels-Clean, Crunch, OD1 & OD2.
Studio-quality digital reverb.
Two FX loops Series/Parallel & Parallel.
Emulated line out
6-way, 7-LED footswitch with memory capabilities.
Finally, all switching can be done via MIDI.

So, if you’re looking for great sounding valves for Marshall JVM410H amplifier you’ve come to the best place.